ES double jacket with beading roll tank
ES double jacket with beading roll tank strength the heat exchange thickness , and jacket part can afford pressure 1.2MPa, pressure affordance increased 600% , and it could be instead of coil tank . Cost is cheaper than coil tank ,and use life is longer . It is a good choice instead of the coil tank.

Technical parameter

Vertical bending roll double jacket tank (Ф480)
Item |
Specification |
B-0.7-80-J/45-T/1.8 -T-ZSF |
B-0.7-100-J/45-T/1.8 -T-ZSF |
B-0.7-120-J/45-T/1.8 -T-ZSF |
1 |
Capacity |
80L |
100L |
120L |
2 |
Heat exchange |
Double Jacket |
3 |
Working Press. |
0.7MPa |
4 |
Heat exchange middle tank |
1.0MPa |
5 |
Tank dia. |
Ф480mm |
6 |
Inner tank dia. |
Ф390mm |
7 |
Tank size |
Ф480×933mm |
Ф480×1103mm |
Ф480×1273mm |
8 |
Cover material |
Color steel |
9 |
Auxiliary heater |
220V~ 1500W |
10 |
circulation liquid connector |
G1/2”male thread |
11 |
cold/hot water connector |
G1/2" male thread |
12 |
controller |
Line/LED/Mechnical |
13 |
waterproofing grade |
IPX4 |
14 |
package size |
545×545×970 |
545×545×1140 |
545×545×1310 |
Horizontal Beading Roll Double Jacket Tank (Ф480)
Item |
Specification |
B-0.7-80-J/45-T/1.8 |
B-0.7-100-J/45-T/1.8 |
B-0.7-120-J/45-T/1.8 |
-T-ZHF |
-T-ZHF |
-T-ZHF |
1 |
Capacity |
80L |
100L |
120L |
2 |
Heat exchange |
Double Jacket |
3 |
Working Press. |
0.7MPa |
4 |
Heat exchange middle tank |
1.0MPa |
5 |
Tank dia. |
Ф480mm |
6 |
Inner tank dia. |
Ф390mm |
7 |
Tank out dia. |
Ф480×907mm |
Ф480×1077mm |
Ф480×1247mm |
8 |
Cover material |
Color steel |
9 |
Auxiliary heater |
220V~ 1500W |
10 |
circulation liquid connector |
G1/2”male thread |
11 |
cold/hot water connector |
G1/2" male thread |
12 |
controller |
Line/LED/Mechnical |
13 |
waterproofing grade |
IPX4 |
14 |
package size |
545×545×970 |
545×545×1140 |
545×545×1310 |